The following is a small series of Longfeng Machinery to introduce the safety rules of mirror axis processing for everyone, I hope to help everyone!

1. The safety regulations of the machining center must be observed.

2, should wear protective equipment before work, cuffs should be fast, do not wear scarves, gloves, ties, aprons, women workers do not need to wear a cap.

3. Check the correctness of tool compensation, machine zero and workpiece zero before starting the machine.

4. The relative position of the button should meet the operational requirements. Carefully compile and input the NC program.

5. In order to check the working status of equipment protection, insurance, signal, position, mechanical transmission, electrical, hydraulic and digital display systems, cutting can be carried out under all normal conditions.

6. Before the machine is commissioned, check the working status of the lubrication, mechanical, electrical, hydraulic and digital display systems. Cutting can be carried out under all normal conditions.

7. After the machine tool enters the machining operation according to the program, the operator is not allowed to touch the moving workpiece, tool and transmission component, and it is not allowed to transfer or carry tools and other items across the rotating parts of the machine tool.

8. It must be stopped when adjusting the machine tool, clamping the workpiece, cutting the tool and wiping the machine.

9. Tools or other items should not be placed on appliances, operating cabinets, and protective covers.

10. Do not remove iron filings directly with your hands. Special tools should be used for cleaning.

11. Found abnormal conditions and alarm signals, stop immediately, please check with relevant personnel.

12. Do not leave the workstation while the machine is running. If you are leaving, place the workbench in the middle position and return to the toolholder. You must stop and power off the main unit.

       The above is the relevant information introduced by the mirror axis processing manufacturers. If you need to know more related content, please contact us!